* Add bell button
Fix#4890
* Remove duplicate type from post-deployment migration
* Fix legacy class type mappings
* Improve query performance with better index
* Fix validation
* Remove redundant index from notifications
* Do not serve account actors at all in limited federation mode
When an account is fetched without a signature from an allowed instance,
return an error.
This isn't really an improvement in security, as the only information that was
previously returned was required protocol-level info, and the only personal bit
was the existence of the account. The existence of the account can still be
checked by issuing a webfinger query, as those are accepted without signatures.
However, this change makes it so that unallowed instances won't create account
records on their end when they find a reference to an unknown account.
The previous behavior of rendering a limited list of fields, instead of not
rendering the actor at all, was in order to prevent situations in which two
instances in Authorized Fetch mode or Limited Federation mode would fail to
reach each other because resolving an account would require a signed query…
from an account which can only be fetched with a signed query itself. However,
this should now be fine as fetching accounts is done by signing on behalf of
the special instance actor, which does not require any kind of valid signature
to be fetched.
* Fix tests
Conflicts:
- `app/controllers/accounts_controller.rb`:
Upstream change too close to a glitch-soc change related to
instance-local toots. Merged upstream changes.
- `app/services/fan_out_on_write_service.rb`:
Minor conflict due to glitch-soc's handling of Direct Messages,
merged upstream changes.
- `yarn.lock`:
Not really a conflict, caused by glitch-soc-only dependencies
being textually too close to updated upstream dependencies.
Merged upstream changes.
* feat: add possibility of adding WebAuthn security keys to use as 2FA
This adds a basic UI for enabling WebAuthn 2FA. We did a little refactor
to the Settings page for editing the 2FA methods – now it will list the
methods that are available to the user (TOTP and WebAuthn) and from
there they'll be able to add or remove any of them.
Also, it's worth mentioning that for enabling WebAuthn it's required to
have TOTP enabled, so the first time that you go to the 2FA Settings
page, you'll be asked to set it up.
This work was inspired by the one donde by Github in their platform, and
despite it could be approached in different ways, we decided to go with
this one given that we feel that this gives a great UX.
Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com>
* feat: add request for WebAuthn as second factor at login if enabled
This commits adds the feature for using WebAuthn as a second factor for
login when enabled.
If users have WebAuthn enabled, now a page requesting for the use of a
WebAuthn credential for log in will appear, although a link redirecting
to the old page for logging in using a two-factor code will also be
present.
Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com>
* feat: add possibility of deleting WebAuthn Credentials
Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com>
* feat: disable WebAuthn when an Admin disables 2FA for a user
Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com>
* feat: remove ability to disable TOTP leaving only WebAuthn as 2FA
Following examples form other platforms like Github, we decided to make
Webauthn 2FA secondary to 2FA with TOTP, so that we removed the
possibility of removing TOTP authentication only, leaving users with
just WEbAuthn as 2FA. Instead, users will have to click on 'Disable 2FA'
in order to remove second factor auth.
The reason for WebAuthn being secondary to TOPT is that in that way,
users will still be able to log in using their code from their phone's
application if they don't have their security keys with them – or maybe
even lost them.
* We had to change a little the flow for setting up TOTP, given that now
it's possible to setting up again if you already had TOTP, in order to
let users modify their authenticator app – given that now it's not
possible for them to disable TOTP and set it up again with another
authenticator app.
So, basically, now instead of storing the new `otp_secret` in the
user, we store it in the session until the process of set up is
finished.
This was because, as it was before, when users clicked on 'Edit' in
the new two-factor methods lists page, but then went back without
finishing the flow, their `otp_secret` had been changed therefore
invalidating their previous authenticator app, making them unable to
log in again using TOTP.
Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com>
* refactor: fix eslint errors
The PR build was failing given that linting returning some errors.
This commit attempts to fix them.
* refactor: normalize i18n translations
The build was failing given that i18n translations files were not
normalized.
This commits fixes that.
* refactor: avoid having the webauthn gem locked to a specific version
* refactor: use symbols for routes without '/'
* refactor: avoid sending webauthn disabled email when 2FA is disabled
When an admins disable 2FA for users, we were sending two mails
to them, one notifying that 2FA was disabled and the other to notify
that WebAuthn was disabled.
As the second one is redundant since the first email includes it, we can
remove it and send just one email to users.
* refactor: avoid creating new env variable for webauthn_origin config
* refactor: improve flash error messages for webauthn pages
Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com>
Conflicts:
- `app/javascript/mastodon/actions/compose.js`:
Not a “real” conflict, but change too close to a change we made to
fix the vanilla WebUI locally pushing authored local-only toots in the
public TL view.
* Add tests for some cachable responses
This only covers responses that we should have managed to make cachable
so far. It's not the case of all responses that should be cachable in
the end.
* Fix RSS feeds not being cachable
Conflicts:
- `app/controllers/activitypub/collections_controller.rb`:
Conflict due to glitch-soc having to take care of local-only
pinned toots in that controller.
Took upstream's changes and restored the local-only special
handling.
- `app/controllers/auth/sessions_controller.rb`:
Minor conflicts due to the theming system, applied upstream
changes, adapted the following two files for glitch-soc's
theming system:
- `app/controllers/concerns/sign_in_token_authentication_concern.rb`
- `app/controllers/concerns/two_factor_authentication_concern.rb`
- `app/services/backup_service.rb`:
Minor conflict due to glitch-soc having to handle local-only
toots specially. Applied upstream changes and restored
the local-only special handling.
- `app/views/admin/custom_emojis/index.html.haml`:
Minor conflict due to the theming system.
- `package.json`:
Upstream dependency updated, too close to a glitch-soc-only
dependency in the file.
- `yarn.lock`:
Upstream dependency updated, too close to a glitch-soc-only
dependency in the file.
Conflicts:
- `Gemfile.lock`:
Not a real conflict, just a glitch-soc-only dependency too close to a
dependency that got updated upstream. Updated as well.
- `app/models/status.rb`:
Not a real conflict, just a change too close to glitch-soc-changed code
for optionally showing boosts in public timelines.
Applied upstream changes.
- `app/views/layouts/application.html.haml`:
Upstream a new, static CSS file, conflict due to glitch-soc's theming
system, include the file regardless of the theme.
- `config/initializers/content_security_policy.rb`:
Upstream dropped 'unsafe-inline' from the 'style-src' directive, but
both files are very different. Removed 'unsafe-inline' as well.
Conflicts:
- `app/controllers/statuses_controller.rb`:
Upstream disabled the embed controller for reblogs.
Not a real conflict, but glitch-soc has an extra line to deal
with its theming system.
Ported upstream changes.
- `app/javascript/packs/public.js`:
Upstream made changes to get rid of most inline CSS, this changes
javascript for public pages, which in glitch are split between
different files. Ported those changes.
- `app/models/status.rb`:
Upstream changed the block check in `Status#permitted_for` to
include domain-block checks. Not a real conflict with glitch-soc,
but our scope is slightly different, as our scope for
unauthenticated access do not include instance-local toots.
Ported upstream changes.
- `app/serializers/rest/instance_serializer.rb`:
Not a real conflict, upstream added a new field to the instance
serializer, the conflict is one line above since we added more of
that.
Ported upstream changes.
- `app/views/settings/profiles/show.html.haml`:
Upstream got rid of most inline CSS and moved hidden elements
to data attributes in the process, in fields were we have
different values.
Ported upstream changes while keeping our glitch-specific
values.
- `app/views/statuses/_simple_status.html.haml`:
Upstream got rid of inline CSS on an HAML line we treat
differently, stripping empty text nodes.
Ported upstream changes to the style attribute, keeping
the empty text node stripping behavior.
Conflicts:
- `README.md`:
Our README.md files are completely different. Discarded upstream changes.
- `app/javascript/core/admin.js`:
Updating rails-ujs, no real conflict, but a comment to close to changed
code. Various glitch-soc-only files have been updated to match those changes,
though.
- `package.json`:
No real conflict, just an additional dependency in glitch-soc that was too
close to something updated upstream. Took upstream's changes.
Conflicts:
- `app/controllers/api/v1/statuses_controller.rb`:
Conflict due to upstream adding a new parameter (with_rate_limit),
too close to glitch-soc's own additional parameter (content_type).
Added upstream's parameter.
- `app/services/post_status_service.rb`:
Conflict due to upstream adding a new parameter (rate_limit),
too close to glitch-soc's own additional parameter (content_type).
Added upstream's parameter.
- `app/views/settings/preferences/appearance/show.html.haml`:
Conflict due to us not exposing theme settings here (as we have
a different flavour/skin menu).
Took upstream change, while still not exposing theme settings.
- `config/webpack/shared.js`:
Coding style fixes for a part we have rewritten.
Discarded upstream changes.
Instead of returning a signature verification error, pretend there
was no signature (i.e., this does not allow access to resources that
need a valid signature), so public resources can still be fetched
Fix#13011
* Add announcements
Fix#11006
* Add reactions to announcements
* Add admin UI for announcements
* Add unit tests
* Fix issues
- Add `with_dismissed` param to announcements API
- Fix end date not being formatted when time range is given
- Fix announcement delete causing reactions to send streaming updates
- Fix announcements container growing too wide and mascot too small
- Fix `all_day` being settable when no time range is given
- Change text "Update" to "Announcement"
* Fix scheduler unpublishing announcements before they are due
* Fix filter params not being passed to announcements filter
Conflicts:
- `app/controllers/application_controller.rb`:
Conflict due to theming system.
- `app/controllers/oauth/authorizations_controller.rb`:
Conflict due to theming system.
* Hide blocked, muted, and blocked-by users from toot favourite lists
* Hide blocked, muted, and blocked-by users from toot reblog lists
* Hide blocked, muted, and blocked-by users from followers/following (API)
* Fix tests
* Hide blocked, muted, and blocked-by users from followers/following on public pages
Conflicts:
- `config/locales/en.yml`
No real conflict, upstream added a translatable string “too close” to
one specific to glitch-soc
- `lib/mastodon/statuses_cli.rb`
Fixes made upstream, while changed in glitch-soc to keep bookmarked statuses
- `package.json`
No real conflict, additional dependency in glitch-soc
* Revert "Fix ignoring whole status because of one invalid hashtag (#11621)"
This reverts commit dff46b260b.
* Fix statuses being rejected because of invalid hashtag names
* Add spec for invalid hashtag names in statuses
* Add test for featured tags controller
* make it not return http 400 when passing and empty source argument
* create a spec for the empty source hash bug
* compact checks for nil, empty? parameters
* use nil.blank? instead checking for nil
* Add backend support for bookmarks
Bookmarks behave like favourites, except they aren't shared with other
users and do not have an associated counter.
* Add spec for bookmark endpoints
* Add front-end support for bookmarks
* Introduce OAuth scopes for bookmarks
* Add bookmarks to archive takeout
* Fix migration
* Coding style fixes
* Fix rebase issue
* Update bookmarked_statuses to latest UI changes
* Update bookmark actions to properly reflect status changes in state
* Add bookmarks item to single-column layout
* Make active bookmarks red
* Add nodeinfo endpoint
* dont commit stuff from my local dev
* consistant naming since we implimented 2.1 schema
* Add some additional node info stuff
* Add nodeinfo endpoint
* dont commit stuff from my local dev
* consistant naming since we implimented 2.1 schema
* expanding this to include federation info
* codeclimate feedback
* CC feedback
* using activeserializers seems like a good idea...
* get rid of draft 2.1 version
* Reimplement 2.1, also fix metaData -> metadata
* Fix metaData -> metadata here too
* Fix nodeinfo 2.1 tests
* Implement cache for monthly user aggregate
* Useless
* Remove ostatus from the list of supported protocols
* Fix nodeinfo's open_registration reading obsolete setting variable
* Only serialize domain blocks with user-facing limitations
* Do not needlessly list noop severity in nodeinfo
* Only serialize domain blocks info in nodeinfo when they are set to be displayed to everyone
* Enable caching for nodeinfo endpoints
* Fix rendering nodeinfo
* CodeClimate fixes
* Please CodeClimate
* Change InstancePresenter#active_user_count_months for clarity
* Refactor NodeInfoSerializer#metadata
* Remove nodeinfo 2.1 support as the schema doesn't exist
* Clean-up
Conflicts:
- Gemfile
- app/controllers/api/v1/search_controller.rb
Conflict because we changed the number of default results to be
configurable
- app/lib/settings/scoped_settings.rb
Addition of a new “noindex” site-wide setting,
conflict due to our change of the two other site-wide settings
(default flavour and skin instead of theme)
- spec/controllers/application_controller_spec.rb
Addition of a new “noindex” site-wide setting,
conflict due to our change of the two other site-wide settings
(default flavour and skin instead of theme)
Conflicts:
- app/views/directories/index.html.haml
Upstream has redesigned the profile directory, and we
had a glitch-soc-specific change to hide follower counts.
Ported that change to the new design.
Conflicts:
- app/models/status.rb
- app/services/remove_status_service.rb
- db/schema.rb
All conflicts were due to the addition of a `deleted_at` attribute
to Statuses and reworked database indexes.
The reason for unattaching media instead of removing it is to support
delete & redraft functionality, but remote or staff-removed statuses
will never be redrafted, so the media should be deleted immediately
Fix#271
Add back the `GET /api/v1/trends` API with the caveat that it does
not return tags that have not been allowed to trend by the staff.
When a hashtag begins to trend (internally) and that hashtag has
not been previously reviewed by the staff, the staff is notified.
The new admin UI for hashtags allows filtering hashtags by where
they are used (e.g. in the profile directory), whether they have
been reviewed or are pending reviewal, they show by how many people
the hashtag is used in the directory, how many people used it
today, how many statuses with it have been created today, and it
allows fixing the name of the hashtag to make it more readable.
The disallowed hashtags feature has been reworked. It is now
controlled from the admin UI for hashtags instead of from
the file `config/settings.yml`
Allow access to account settings, 2FA, authorized applications, and
account deletions to unconfirmed and pending users, as well as
users who had their accounts disabled. Suspended users cannot update
their e-mail or password or delete their account.
Display account status on account settings page, for example, when
an account is frozen, limited, unconfirmed or pending review.
After sign up, login users straight away and show a simple page that
tells them the status of their account with links to account settings
and logout, to reduce onboarding friction and allow users to correct
wrongly typed e-mail addresses.
Move the final sign-up step of SSO integrations to be the same
as above to reduce code duplication.
* Remove Salmon and PubSubHubbub endpoints
* Add error when trying to follow OStatus accounts
* Fix new accounts not being created in ResolveAccountService
Conflicts:
- app/models/media_attachment.rb
Upstream added audio attachment support
- app/serializers/initial_state_serializer.rb
Upstream added audio attachment support and how mimetypes are returned
- app/serializers/rest/instance_serializer.rb
Upstream added a few fields
- config/application.rb
Upstream added a different paperclip transcoder
* Fix poll API not requiring authentication on non-public polls
That API does not reveal the content of the status, i.e. the question
itself, nor who the author is, nor which status it belongs to, but it
does reveal the poll options and how many answers they got
Fix#10959
* Add test
Conflicts:
- app/models/account.rb
- app/views/settings/profiles/show.html.haml
- spec/controllers/api/v1/accounts/credentials_controller_spec.rb
Conflicts were due to an increase in account bio length upstream, which
is already covered in glitch-soc through `MAX_BIO_CHARS`.
* Add `from_account` to notifications API
this adds the ability to filter notifications by the account they
originated from
* passing a non-existent user should cause none to be returned
* Fix codeclimate warnings
* fix more codeclimate warnings
* make requested changes:
* use account id instead of user@domain
* name the param `account_id` instead of `from_account`
* Don't use `return` in a lambda
* Change note_length validator from 160 to 500
* Change input maxlength from 160 to 500
* update bio test from 160 to 500
* Multiply a string 30 times instead of 10
* Record account suspend/silence time and keep track of domain blocks
* Also unblock users who were suspended/silenced before dates were recorded
* Add tests
* Keep track of suspending date for users suspended through the CLI
* Show accurate number of accounts that would be affected by unsuspending an instance
* Change migration to set silenced_at and suspended_at
* Revert "Also unblock users who were suspended/silenced before dates were recorded"
This reverts commit a015c65d2d1e28c7b7cfab8b3f8cd5fb48b8b71c.
* Switch from using suspended and silenced to suspended_at and silenced_at
* Add post-deployment migration script to remove `suspended` and `silenced` columns
* Use Account#silence! and Account#suspend! instead of updating the underlying property
* Add silenced_at and suspended_at migration to post-migration
* Change account fabricator to translate suspended and silenced attributes
* Minor fixes
* Make unblocking domains always retroactive
* When trying to block an already-blocked domain, provide a link to the block
* Fix styling for links in flash messages
* Allow blocks to be upgraded but not downgraded
* Check that an invite link is valid before bypassing approval mode
Fixes#10656
* Add tests
* Only consider valid invite links in registration controller
* fixup
* Refactor imports
* Export show_reblogs when exporting list of followed users
* Add support for importing show_reblogs with following collection
* Fix tests
* Revert "Fix filtering of favourited_by, reblogged_by, followers and following (#10447)"
This reverts commit 120544067f.
* Revert "Hide blocking accounts from blocked users (#10442)"
This reverts commit 62bafa20a1.
* Improve blocked view of profiles
- Change "You are blocked" to "Profile unavailable"
- Hide following/followers in API when blocked
- Disable follow button and show "Profile unavailable" on public profile as well
Conflicts:
- app/controllers/following_accounts_controller.rb
Conflicts were due to glitch-soc's theming system.
- app/javascript/packs/public.js
Some code has been change upstream, but it has been
moved to app/javascript/core/settings.js in glitch-soc.
Applied the changes there.
* Revert "Add indication that you have been blocked in web UI (#10420)"
This reverts commit bd02ec6daa.
* Revert "Add `blocked_by` relationship to the REST API (#10373)"
This reverts commit 9745de883b.
* Hide blocking accounts from search results
* Filter blocking accouts from account followers
* Filter blocking accouts from account's following accounts
* Filter blocking accounts from “reblogged by” and “favourited by” lists
* Remove blocking account from URL search
* Return 410 on trying to fetch user data from a user who blocked us
* Return 410 in /api/v1/account/statuses for suspended or blocking accounts
* Fix status filtering when performing URL search
* Restore some React improvements
Restore some cleanup from bd02ec6daa
* Refactor by adding `without_blocking` scope
Conflicts:
- app/controllers/admin/settings_controller.rb
- app/models/form/admin_settings.rb
Conflicts caused by upstream refactoring, while we have
flavours and skins, with the flavour_and_skin pseudo-setting.
Conflicts:
- config/locales/en.yml
Conflict caused by the glitch-soc-specific “flavour” string being too close
to the newly introduced “identity_proofs” string. Just included both.
* create account_identity_proofs table
* add endpoint for keybase to check local proofs
* add async task to update validity and liveness of proofs from keybase
* first pass keybase proof CRUD
* second pass keybase proof creation
* clean up proof list and add badges
* add avatar url to keybase api
* Always highlight the “Identity Proofs” navigation item when interacting with proofs.
* Update translations.
* Add profile URL.
* Reorder proofs.
* Add proofs to bio.
* Update settings/identity_proofs front-end.
* Use `link_to`.
* Only encode query params if they exist.
URLs without params had a trailing `?`.
* Only show live proofs.
* change valid to active in proof list and update liveness before displaying
* minor fixes
* add keybase config at well-known path
* extremely naive feature flagging off the identity proof UI
* fixes for rubocop
* make identity proofs page resilient to potential keybase issues
* normalize i18n
* tweaks for brakeman
* remove two unused translations
* cleanup and add more localizations
* make keybase_contacts an admin setting
* fix ExternalProofService my_domain
* use Addressable::URI in identity proofs
* use active model serializer for keybase proof config
* more cleanup of keybase proof config
* rename proof is_valid and is_live to proof_valid and proof_live
* cleanup
* assorted tweaks for more robust communication with keybase
* Clean up
* Small fixes
* Display verified identity identically to verified links
* Clean up unused CSS
* Add caching for Keybase avatar URLs
* Remove keybase_contacts setting
Conflicts:
- app/controllers/settings/follower_domains_controller.rb
Removed upstream. Did the same here. Maybe we should not have?
- config/locales/en.yml
Upstream removed the “Authorized followers” page and associated
translations. This is too close in the file to our glitch-soc-specific
“flavour” string. No actual conflict.
- config/locales/ja.yml
Same as above.
- config/locales/pl.yml
Same as above.
- config/navigation.rb
No real conflict. New route added too close to the glitch-soc-specific
“flavours” one.
- config/webpack/configuration.js
Upstream refactored the webpack(er) configuration quite a bit.
Tried to keep up.
- config/webpack/loaders/babel.js
Upstream refactored the webpack(er) configuration quite a bit.
Tried to keep up.
The contents of this file have been moved to package.json.
- config/webpack/shared.js
Upstream refactored the webpack(er) configuration quite a bit.
Tried to keep up.
- config/webpacker.yml
Upstream refactored the webpack(er) configuration quite a bit.
Tried to keep up.
- jest.config.js
The contents of this file have been moved to package.json.
- package.json
Upstream refactored the webpack(er) configuration quite a bit.
Tried to keep up.
- yarn.lock
Upstream refactored the webpack(er) configuration quite a bit.
Tried to keep up.
* Add polls
Fix#1629
* Add tests
* Fixes
* Change API for creating polls
* Use name instead of content for votes
* Remove poll validation for remote polls
* Add polls to public pages
* When updating the poll, update options just in case they were changed
* Fix public pages showing both poll and other media
Conflicts:
- .eslintrc.yml
Removed, as upstream removed it.
- app/controllers/admin/statuses_controller.rb
Minor code cleanup when porting one of our features.
- app/models/account.rb
Note length validation has changed upstream.
We now use upstream's validation (dropped legacy glitch-soc
account metadata stuff) but with configurable limit.
- app/services/post_status_service.rb
Upstream has added support for scheduled toots, refactoring
the code a bit. Adapted our changes to this refactoring.
- app/views/stream_entries/_detailed_status.html.haml
Not a real conflict, changes too close.
- app/views/stream_entries/_simple_status.html.haml
Not a real conflict, changes too close.
* Add REST API for creating an account
The method is available to apps with a token obtained via the client
credentials grant. It creates a user and account records, as well as
an access token for the app that initiated the request. The user is
unconfirmed, and an e-mail is sent as usual.
The method returns the access token, which the app should save for
later. The REST API is not available to users with unconfirmed
accounts, so the app must be smart to wait for the user to click a
link in their e-mail inbox.
The method is rate-limited by IP to 5 requests per 30 minutes.
* Redirect users back to app from confirmation if they were created with an app
* Add tests
* Return 403 on the method if registrations are not open
* Require agreement param to be true in the API when creating an account
* Add moderation warnings
Replace individual routes for disabling, silencing, and suspending
a user, as well as the report update route, with a unified account
action controller that allows you to select an action (none,
disable, silence, suspend) as well as whether it should generate an
e-mail notification with optional custom text. That notification,
with the optional custom text, is saved as a warning.
Additionally, there are warning presets you can configure to save
time when performing the above.
* Use Account#local_username_and_domain
Conflicts:
- app/controllers/admin/base_controller.rb
Some refactoring made upstream, no real conflict.
- app/javascript/mastodon/features/compose/components/compose_form.js
Updated using upstream's code but using maxChars instead of the
hardcoded length of 500 characters per toot.
- app/javascript/styles/mastodon/components.scss
Upstream redesigned the onboarding modal. Not sure why we had a
conflict there.
* Improve overview of accounts in admin UI
- Display suspended status, role, last activity and IP prominently
- Default to showing local accounts
- Default to not showing suspended accounts
* Remove unused strings
* Fix tests
* Allow filtering accounts by IP mask
* Eliminate extra accounts select query from FollowService
* Optimistically update follow state in web UI and hide loading bar
Fix#6205
* Asynchronize NotifyService in FollowService
And fix failing test
* Skip Webfinger resolve routine when called from FollowService if possible
If an account is ActivityPub, then webfinger re-resolving is not necessary
when called from FollowService. Improve options of ResolveAccountService
Conflicts:
- .github/ISSUE_TEMPLATE/bug_report.md
Took our version.
- CONTRIBUTING.md
Updated the embedded copy of upstream's version.
- README.md
Took our version.
- app/policies/status_policy.rb
Not a real conflict, took code from both.
- app/views/layouts/embedded.html.haml
Added upstream's changes (dns-prefetch) and fixed
`%body.embed`
- app/views/settings/preferences/show.html.haml
Reverted some of upstream changes, as we have a
page dedicated for flavours and skins.
- config/initializers/content_security_policy.rb
Kept our version of the CSP.
- config/initializers/doorkeeper.rb
Not a real conflict, took code from both.
* Downcase signed_headers string before building the signed string
The HTTP Signatures draft does not mandate the “headers” field to be downcased,
but mandates the header field names to be downcased in the signed string, which
means that prior to this patch, Mastodon could fail to process signatures from
some compliant clients. It also means that it would not actually check the
Digest of non-compliant clients that wouldn't use a lowercased Digest field
name.
Thankfully, I don't know of any such client.
* Revert "Remove dead code (#8919)"
This reverts commit a00ce8c92c.
* Restore time window checking, change it to 12 hours
By checking the Date header, we can prevent replaying old vulnerable
signatures. The focus is to prevent replaying old vulnerable requests
from software that has been fixed in the meantime, so a somewhat long
window should be fine and accounts for timezone misconfiguration.
* Escape users' URLs when formatting them
Fixes possible HTML injection
* Escape all string interpolations in Formatter class
Slightly improve performance by reducing class allocations
from repeated Formatter#encode calls
* Fix code style issues
* Downcase signed_headers string before building the signed string
The HTTP Signatures draft does not mandate the “headers” field to be downcased,
but mandates the header field names to be downcased in the signed string, which
means that prior to this patch, Mastodon could fail to process signatures from
some compliant clients. It also means that it would not actually check the
Digest of non-compliant clients that wouldn't use a lowercased Digest field
name.
Thankfully, I don't know of any such client.
* Revert "Remove dead code (#8919)"
This reverts commit a00ce8c92c.
* Restore time window checking, change it to 12 hours
By checking the Date header, we can prevent replaying old vulnerable
signatures. The focus is to prevent replaying old vulnerable requests
from software that has been fixed in the meantime, so a somewhat long
window should be fine and accounts for timezone misconfiguration.
* Escape users' URLs when formatting them
Fixes possible HTML injection
* Escape all string interpolations in Formatter class
Slightly improve performance by reducing class allocations
from repeated Formatter#encode calls
* Fix code style issues
* Add conversations API
* Add web UI for conversations
* Add test for conversations API
* Add tests for ConversationAccount
* Improve web UI
* Rename ConversationAccount to AccountConversation
* Remove conversations on block and mute
* Change last_status_id to be a denormalization of status_ids
* Add optimistic locking
Conflicts:
db/migrate/20170716191202_add_hide_notifications_to_mute.rb
spec/controllers/application_controller_spec.rb
Took our version, upstream changes were only minor style linting.
* Allow min_id pagination in Feed#get
* Add min_id pagination to home and list timeline APIs
* Add min_id pagination to account statuses, public and tag APIs
* Remove unused stub in reports API
* Use min_id pagination in notifications, favourites, and fix order
* Fix HomeFeed#from_database not using paginate_by_id
* Add force_login option to OAuth authorize page
For when a user needs to sign into an app from multiple accounts
on the same server
* When logging out from modal header, redirect back after re-login
* Add default_settings class method to ScopedSettings
ScopedSettings was extended to use value of unscoped setting instead of
only using defaults set in config/settings.yml for selected settings.
This adds possibility for admins to set default values of users' settings,
for example default theme (as requested in #7092).
* Add ability to change an instance default theme
Closes#7092
Conflicts:
.circleci/config.yml
app/controllers/authorize_follows_controller.rb
app/javascript/packs/public.js
Moved new stuff from packs/public.js to core/public.js.
Added appropriate use_pack in new controllers.
* Add remote interaction dialog for toots
* Change AuthorizeFollow into AuthorizeInteraction, support statuses
* Update brakeman.ignore
* Adjust how interaction buttons are display on public pages
* Fix tests
Manually-resolved conflicts:
.circleci/config.yml
app/controllers/accounts_controller.rb
app/controllers/auth/passwords_controller.rb
app/controllers/statuses_controller.rb
app/javascript/packs/public.js
app/models/media_attachment.rb
app/views/stream_entries/_content_spoiler.html.haml
app/views/stream_entries/_media.html.haml
config/locales/en.yml
config/locales/ja.yml
config/locales/pl.yml
lib/mastodon/version.rb
Some content from app/javascript/packs/public.js has been split to
app/javascript/core/settings.js.
Translation strings for glitch-soc's keyword mutes were dropped.
Everything else was mostly “take both”.
Completely remove glitch-soc's Keyword Mutes, migrate
existing database records to CustomFilters.
Handling of client-side filters is still not implemented
in the glitch-soc front-end.
Conflicts:
README.md
app/controllers/statuses_controller.rb
app/lib/feed_manager.rb
config/navigation.rb
spec/lib/feed_manager_spec.rb
Conflicts were resolved by taking both versions for each change.
This means the two filter systems (glitch-soc's keyword mutes and tootsuite's
custom filters) are in place, which will be changed in a follow-up commit.
* Add more granular OAuth scopes
* Add human-readable descriptions of the new scopes
* Ensure new scopes look good on the app UI
* Add tests
* Group scopes in screen and color-code dangerous ones
* Fix wrong extra scope
* Re-add follow recommendations API
GET /api/v1/suggestions
Removed in 8efa081f21 due to Neo4J
dependency. The algorithm uses triadic closures, takes into account
suspensions, blocks, mutes, domain blocks, excludes locked and moved
accounts, and prefers more recently updated accounts.
* Track interactions with people you don't follow
Replying to, favouriting and reblogging someone you're not following
will make them show up in follow recommendations. The interactions
have different weights:
- Replying is 1
- Favouriting is 10 (decidedly positive interaction, but private)
- Reblogging is 20
Following them, muting or blocking will remove them from the list,
obviously.
* Remove triadic closures, ensure potential friendships are trimmed
* Add keyword filtering
GET|POST /api/v1/filters
GET|PUT|DELETE /api/v1/filters/:id
- Irreversible filters can drop toots from home or notifications
- Other filters can hide toots through the client app
- Filters use a phrase valid in particular contexts, expiration
* Make sure expired filters don't get applied client-side
* Add missing API methods
* Remove "regex filter" from column settings
* Add tests
* Add test for FeedManager
* Add CustomFilter test
* Add UI for managing filters
* Add streaming API event to allow syncing filters
* Fix tests
Conflicts:
app/javascript/mastodon/locales/en.json
app/javascript/mastodon/locales/ja.json
app/javascript/mastodon/locales/pl.json
The above conflicts appear to be a text conflict introduced by
glitch-soc's additional level of columns (i.e. moving a bunch of columns
under the Misc option). They were resolved via accept-ours.
- POST /api/v1/push/subscription
- PUT /api/v1/push/subscription
- DELETE /api/v1/push/subscription
- New OAuth scope: "push" (required for the above methods)
* Use table for statuses in report
* Display reported account and reporter in the same table
* Split accounts and general report info into two tables again
* Redesign report statuses table, notes, merge notes and action log
* Remove unused translations
* Fix code style issue
* Fix code style issue
* Fix code style issue
Commit 519119f657 missed a change for
stream entry page. Instead of duplicating the change, redirect to account
status page. It would also help crawlers (of search engines, for example)
to understand a stream entry URL and its corresponding status URL points
to the same page.
* Admin: Show unconfirmed email address on account page
* Admin: Allow staff to change user email addresses
* ActionLog: On change_email, log current email address and new unconfirmed email address
Conflicts:
app/serializers/initial_state_serializer.rb
The glitch flavour isn't yet pulling custom emoji data on its own (see
https://github.com/tootsuite/mastodon/pull/7047). Once that gets into
the glitch flavour, we can eliminate the custom_emojis load.
* Enable updating additional account information from user preferences via rest api
Resolves#6553
* Pacify rubocop
* Decoerce incoming settings in UserSettingsDecorator
* Create user preferences hash directly from incoming credentials instead of going through ActionController::Parameters
* Clean up user preferences update
* Use ActiveModel::Type::Boolean instead of manually checking stringified number equivalence
Previously these returns 302 redirects instead of 403s, which meant posting links to admin pages in slack caused them to unfurl, rather than stay as a link. Additionally, require_admin! doesn't appear to be actively used, on require_staff!
* Implement Assignment of Reports (#6967)
* Change translation of admin.report.comment.label to "Report Comment" for clarity
As we'll soon add the ability for reports to have comments on them, this clarification makes sense.
* Implement notes for Reports
This enables moderators to leave comments about a report whilst they work on it
* Fix display of report moderation notes
* Allow reports to be reopened / marked as unresolved
* Redirect to reports listing upon resolution of report
* Implement "resolve with note" functionality
* Add inverse relationship for report notes
* Remove additional database querying when loading report notes
* Fix tests for reports
* Fix localisations for report notes / reports
Previously the default locale was set by Localized concern for controllers,
but it was not enforced for mailers.
config is enforced throughout the application and an appropriate place to
set the default locale.
* Fix regeneration marker not being removed after completion
* Return HTTP 206 from /api/v1/timelines/home if regeneration in progress
Prioritize RegenerationWorker by putting it into default queue
* Display loading indicator and poll home timeline while it regenerates
* Add graphic to regeneration message
* Make "not found" indicator consistent with home regeneration
A change introduced in #6125 prevents
`Devise::Models::Confirmable#confirm` from being called for existing
users, which in turn leads to `email` not being set to
`unconfirmed_email`, breaking email updates. This also adds a test
that would've caught this issue.
* Break out nested relationship API keys
This closes#5856 by restoring the existing behavior of the `muting`
and `following` keys (returning booleans rather than truthy or false).
It adds `showing_reblogs` and `muting_notifications` keys:
* `showing_reblogs` returns true if:
1. You've requested to follow the user, with reblogs shown, or
2. You are following the user, with reblogs shown.
* `muting_notifications` returns true if you have muted the user and
their notifications as well.
* Rubocop fix
* Fix pulling reblog/mute status from relationships
I could swear this had passed tests before, but apparently not.
Works now.
* More test fixes
Really, you'd expect this to be more straightforward.
* Allow hiding of reblogs from followed users
This adds a new entry to the account menu to allow users to hide
future reblogs from a user (and then if they've done that, to show
future reblogs instead).
This does not remove or add historical reblogs from/to the user's
timeline; it only affects new statuses.
The API for this operates by sending a "reblogs" key to the follow
endpoint. If this is sent when starting a new follow, it will be
respected from the beginning of the follow relationship (even if
the follow request must be approved by the followee). If this is
sent when a follow relationship already exists, it will simply
update the existing follow relationship. As with the notification
muting, this will now return an object ({reblogs: [true|false]}) or
false for each follow relationship when requesting relationship
information for an account. This should cause few issues due to an
object being truthy in many languages, but some modifications may
need to be made in pickier languages.
Database changes: adds a show_reblogs column (default true,
non-nullable) to the follows and follow_requests tables. Because
these are non-nullable, we use the existing MigrationHelpers to
perform this change without locking those tables, although the
tables are likely to be small anyway.
Tests included.
See also <https://github.com/glitch-soc/mastodon/pull/212>.
* Rubocop fixes
* Code review changes
* Test fixes
This patchset closes#648 and resolves#3271.
* Rubocop fix
* Revert reblogs defaulting in argument, fix tests
It turns out we needed this for the same reason we needed it in muting:
if nil gets passed in somehow (most usually by an API client not passing
any value), we need to detect and handle it.
We could specify a default in the parameter and then also catch nil, but
there's no great reason to duplicate the default value.
* Add structure for lists
* Add list timeline streaming API
* Add list APIs, bind list-account relation to follow relation
* Add API for adding/removing accounts from lists
* Add pagination to lists API
* Add pagination to list accounts API
* Adjust scopes for new APIs
- Creating and modifying lists merely requires "write" scope
- Fetching information about lists merely requires "read" scope
* Add test for wrong user context on list timeline
* Clean up tests
* Add a hide_notifications column to mutes
* Add muting_notifications? and a notifications argument to mute!
* block notifications in notify_service from hard muted accounts
* Add specs for how mute! interacts with muting_notifications?
* specs testing that hide_notifications in mutes actually hides notifications
* Add support for muting notifications in MuteService
* API support for muting notifications (and specs)
* Less gross passing of notifications flag
* Break out a separate mute modal with a hide-notifications checkbox.
* Convert profile header mute to use mute modal
* Satisfy eslint.
* specs for MuteService notifications params
* add trailing newlines to files for Pork :)
* Put the label for the hide notifications checkbox in a label element.
* Add a /api/v1/mutes/details route that just returns the array of mutes.
* Define a serializer for /api/v1/mutes/details
* Add more specs for the /api/v1/mutes/details endpoint
* Expose whether a mute hides notifications in the api/v1/relationships endpoint
* Show whether muted users' notifications are muted in account lists
* Allow modifying the hide_notifications of a mute with the /api/v1/accounts/:id/mute endpoint
* make the hide/unhide notifications buttons work
* satisfy eslint
* In probably dead code, replace a dispatch of muteAccount that was skipping the modal with launching the mute modal.
* fix a missing import
* add an explanatory comment to AccountInteractions
* Refactor handling of default params for muting to make code cleaner
* minor code style fixes oops
* Fixed a typo that was breaking the account mute API endpoint
* Apply white-space: nowrap to account relationships icons
* Fix code style issues
* Remove superfluous blank line
* Rename /api/v1/mutes/details -> /api/v2/mutes
* Don't serialize "account" in MuteSerializer
Doing so is somewhat unnecessary since it's always the current user's account.
* Fix wrong variable name in api/v2/mutes
* Use Toggle in place of checkbox in the mute modal.
* Make the Toggle in the mute modal look better
* Code style changes in specs and removed an extra space
* Code review suggestions from akihikodaki
Also fixed a syntax error in tests for AccountInteractions.
* Make AddHideNotificationsToMute Concurrent
It's not clear how much this will benefit instances in practice, as the
number of mutes tends to be pretty small, but this should prevent any
blocking migrations nonetheless.
* Fix up migration things
* Remove /api/v2/mutes
Note that this will only hide/show *future* reblogs by a user, and does
nothing to remove/add reblogs that are already in the timeline. I don't
think that's a particularly confusing behavior, and it's a lot easier
to implement (similar to mutes, I believe).
This should eventually be accessible via the API and the web frontend,
but I find it easier to set up an editing interface using Rails
templates and the like. We can always take it out if it turns out we
don't need it.
* Return sensible HTTP status for ActivityPub inbox processing
* Return sensible HTTP status for salmon slap processing
* Return additional information to debug signature verification failures
* Fix order of paginated accounts in FollowerDomainsController
Unordered pagination could result in unexpected behavior.
* Cover Settings::FollowerDomainsController more
* Fix#117 - Add ability to specify alternative text for media attachments
- POST /api/v1/media accepts `description` straight away
- PUT /api/v1/media/:id to update `description` (only for unattached ones)
- Serialized as `name` of Document object in ActivityPub
- Uploads form adjusted for better performance and description input
* Add tests
* Change undo button blend mode to difference
* Fix JavaScript interface with long IDs
Somewhat predictably, the JS interface handled IDs as numbers, which in
JS are IEEE double-precision floats. This loses some precision when
working with numbers as large as those generated by the new ID scheme,
so we instead handle them here as strings. This is relatively simple,
and doesn't appear to have caused any problems, but should definitely
be tested more thoroughly than the built-in tests. Several days of use
appear to support this working properly.
BREAKING CHANGE:
The major(!) change here is that IDs are now returned as strings by the
REST endpoints, rather than as integers. In practice, relatively few
changes were required to make the existing JS UI work with this change,
but it will likely hit API clients pretty hard: it's an entirely
different type to consume. (The one API client I tested, Tusky, handles
this with no problems, however.)
Twitter ran into this issue when introducing Snowflake IDs, and decided
to instead introduce an `id_str` field in JSON responses. I have opted
to *not* do that, and instead force all IDs to 64-bit integers
represented by strings in one go. (I believe Twitter exacerbated their
problem by rolling out the changes three times: once for statuses, once
for DMs, and once for user IDs, as well as by leaving an integer ID
value in JSON. As they said, "If you’re using the `id` field with JSON
in a Javascript-related language, there is a very high likelihood that
the integers will be silently munged by Javascript interpreters. In most
cases, this will result in behavior such as being unable to load or
delete a specific direct message, because the ID you're sending to the
API is different than the actual identifier associated with the
message." [1]) However, given that this is a significant change for API
users, alternatives or a transition time may be appropriate.
1: https://blog.twitter.com/developer/en_us/a/2011/direct-messages-going-snowflake-on-sep-30-2011.html
* Additional fixes for stringified IDs in JSON
These should be the last two. These were identified using eslint to try
to identify any plain casts to JavaScript numbers. (Some such casts are
legitimate, but these were not.)
Adding the following to .eslintrc.yml will identify casts to numbers:
~~~
no-restricted-syntax:
- warn
- selector: UnaryExpression[operator='+'] > :not(Literal)
message: Avoid the use of unary +
- selector: CallExpression[callee.name='Number']
message: Casting with Number() may coerce string IDs to numbers
~~~
The remaining three casts appear legitimate: two casts to array indices,
one in a server to turn an environment variable into a number.
* Back out RelationshipsController Change
This was made to make a test a bit less flakey, but has nothing to
do with this branch.
* Change internal streaming payloads to stringified IDs as well
Per
https://github.com/tootsuite/mastodon/pull/5019#issuecomment-330736452
we need these changes to send deleted status IDs as strings, not
integers.
When a new user confirms their e-mail, bootstrap their home timeline
by automatically following a set of accounts. By default, all local
admin accounts (that are unlocked). Can be customized by new admin
setting (comma-separated usernames, local and unlocked only)
* Raise an error for remote url in StatusFinder
Previous implementation had allowed remote url with status id which also exists on local.
Then that bug leads /api/web/embed to return wrong embed url.
* Fix oembed_controller_spec
- Use statuses controller for embeds instead of stream entries controller
- Prefer /@:username/:id/embed URL for embeds
- Use /@:username as author_url in OEmbed
- Add follow link to embeds which opens web intent in new window
- Use redis cache in development
- Cache entire embed
* Allow multiple pinned statuses to be shown and make them be ordered by pinned date
* Set timestamps NOT NULL
* Make single-line pinned_statuses
* Spec for pinned_statuses
* Remove redundant empty line
* Process Create / Announce activity in FetchRemoteStatusService
* Use activity URL in ActivityPub for reblogs
* Redirect to the original status on StatusesController#show
* Add code for creating/managing apps to settings section
* Add specs for app changes
* Fix controller spec
* Fix view file I pasted over by mistake
* Add locale strings. Add 'my apps' to nav
* Add Client ID/Secret to App page. Add some visual separation
* Fix rubocop warnings
* Fix embarrassing typo
I lost an `end` statement while fixing a merge conflict.
* Add code for creating/managing apps to settings section
- Add specs for app changes
- Add locale strings. Add 'my apps' to nav
- Add Client ID/Secret to App page. Add some visual separation
- Fix some bugs/warnings
* Update to match code standards
* Trigger notification
* Add warning about not sharing API secrets
* Tweak spec a bit
* Cleanup fixture creation by using let!
* Remove unused key
* Add foreign key for application<->user
* Add ActivityPub inbox
* Handle ActivityPub deletes
* Handle ActivityPub creates
* Handle ActivityPub announces
* Stubs for handling all activities that need to be handled
* Add ActivityPub actor resolving
* Handle conversation URI passing in ActivityPub
* Handle content language in ActivityPub
* Send accept header when fetching actor, handle JSON parse errors
* Test for ActivityPub::FetchRemoteAccountService
* Handle public key and icon/image when embedded/as array/as resolvable URI
* Implement ActivityPub::FetchRemoteStatusService
* Add stubs for more interactions
* Undo activities implemented
* Handle out of order activities
* Hook up ActivityPub to ResolveRemoteAccountService, handle
Update Account activities
* Add fragment IDs to all transient activity serializers
* Add tests and fixes
* Add stubs for missing tests
* Add more tests
* Add more tests
* Do not raise unretryable exceptions in ResolveRemoteAccountService
* Removed fatal exceptions from ResolveRemoteAccountService
Exceptions that cannot be retried should not be raised. New exception
class for those that can be retried (Mastodon::UnexpectedResponseError)
* Improve webfinger templates and make tests more flexible
* Clean up AS2 representation of actor
* Refactor outbox
* Create activities representation
* Add representations of followers/following collections, do not redirect /users/:username route if format is empty
* Remove unused translations
* ActivityPub endpoint for single statuses, add ActivityPub::TagManager for better
URL/URI generation
* Add ActivityPub::TagManager#to
* Represent all attachments as Document instead of Image/Video specifically
(Because for remote ones we may not know for sure)
Add mentions and hashtags representation to AP notes
* Add AP-resolvable hashtag URIs
* Use ActiveModelSerializers for ActivityPub
* Clean up unused translations
* Separate route for object and activity
* Adjust cc/to matrices
* Add to/cc to activities, ensure announce activity embeds target status and
not the wrapper status, add "id" to all collections
* Add Request class with HTTP signature generator
Spec: https://tools.ietf.org/html/draft-cavage-http-signatures-06
* Add HTTP signature verification concern
* Add test for SignatureVerification concern
* Add basic test for Request class
* Make PuSH subscribe/unsubscribe requests use new Request class
Accidentally fix lease_seconds not being set and sent properly, and
change the new minimum subscription duration to 1 day
* Make all PuSH workers use new Request class
* Make Salmon sender use new Request class
* Make FetchLinkService use new Request class
* Make FetchAtomService use the new Request class
* Make Remotable use the new Request class
* Make ResolveRemoteAccountService use the new Request class
* Add more tests
* Allow +-30 seconds window for signed request to remain valid
* Disable time window validation for signed requests, restore 7 days
as PuSH subscription duration (which was previous default due to a bug)
* Added a success page to remote following
Includes follow-through links to web (the old redirect target) and back to the remote user's profile
* Use Account.new in spec instead of a fake with only id
(fixes spec)
* Fabricate(:account) over Account.new
* Remove self from the success text
(and all HTML with it)
* Fix#3910 - Require OTP authentication to disable 2FA. Also, remove ability
to generate new OTP backup codes *after* initial backup codes were handed
out during activation
* Restore recovery code re-generation
* Improve display of some 2FA elements
* Add form for account deletion
* If avatar or header are gone from source, remove them
* Add option to have SuspendAccountService remove user record, add tests
* Exclude suspended accounts from search
When case insensitivity is enabled via devise's `config.case_insensitive_keys` then `.find_for_authentication` method needs to be used instead of `.find_by` because second mentioned returns `nil` when valid email with different cases is passed.
More info https://github.com/plataformatec/devise/wiki/How-To:-Use-case-insensitive-emails
* Improve default language decision
This change allows to takes account of accepted language determined by
the user agent even if the custom default locale of the instance is
configured.
* Cover Localized more
* Fix code style
Each of mute, favourite, reblog has been updated to:
- Have a separate controller with just a create and destroy action
- Preserve historical route names to not break the API
- Mild refactoring to break up long methods
* Add specs for api statuses routes
* Update favourited_by and reblogged_by api routes
* Move methods into new controllers
* Use load_accounts methods to simplify index actions
* Clean up load_accounts methods
* Clean up link header generation
* Check for link headers in specs
* Remove unused actions from api/v1/statuses controller
* Remove specs for moved actions
* Move ApiController to Api/BaseController
* API controllers inherit from Api::BaseController
* Add coverage for various error cases in api/base controller
* Coverage for rate limit headers
* Move rate limit headers methods to concern
* Move throttle check to condition on before_action
* Move match_data variable into method
* Move utc timestamp to separate method
* Move header setting into smaller methods
* specs cleanup
* Redirect to streaming_api_base_url
When Rails receives a request to streaming API, it most likely
means that there is another host which is configured to respond
to it. This is to redirect clients to that host if
`STREAMING_API_BASE_URL` is set as another host.
* Use the new Ruby 1.9 hash syntax
* Spec output of Settings::Exports::BlockedAccountsController
* Spec output of Settings::Exports::FollowingAccountsController
* Spec output of Settings::Exports::MutedAccountsController
* Spec Settings::Exports::BaseController
This commit removes duplicate specs in classes inheriting
Settings::Exports::BaseController as well.
* Set delete_modal preference to true by default
* Does not show confirmation modal if delete_modal is false
* Add ja translation for preference setting page
In single user mode, visitors are redirected to the single user's
profile page. So, if you are the owner without a session, you start
from that page, click the login button and authenticate yourself
expecting you'll soon get started with the home page, but in reality
you'll get redirected back to where you started from -- your own
profile page.
This fixes the behavior by redirecting you home after login if you
have started from your own profile page.
- Increase coverage to exercise all parts of each action
- Move into namespace to share common code
- Misc refactor of each action for smaller methods, simpler code
* Introduce recent scope to Status and StreamEntry
Introduce recent scope to Status and StreamEntry as Account has.
* Cover AccountsController more in AccountsController
* Add <ostatus:conversation /> tag to Atom input/output
Only uses ref attribute (not href) because href would be
the alternate link that's always included also.
Creates new conversation for every non-reply status. Carries
over conversation for every reply. Keeps remote URIs verbatim,
generates local URIs on the fly like the rest of them.
* Conversation muting - prevents notifications that reference a conversation
(including replies, favourites, reblogs) from being created. API endpoints
/api/v1/statuses/:id/mute and /api/v1/statuses/:id/unmute
Currently no way to tell when a status/conversation is muted, so the web UI
only has a "disable notifications" button, doesn't work as a toggle
* Display "Dismiss notifications" on all statuses in notifications column, not just own
* Add "muted" as a boolean attribute on statuses JSON
For now always false on contained reblogs, since it's only relevant for
statuses returned from the notifications endpoint, which are not nested
Remove "Disable notifications" from detailed status view, since it's
only relevant in the notifications column
* Up max class length
* Remove pending test for conversation mute
* Add tests, clean up
* Rename to "mute conversation" and "unmute conversation"
* Raise validation error when trying to mute/unmute status without conversation
* Adding account domain blocks that filter notifications and public timelines
* Add tests for domain blocks in notifications, public timelines
Filter reblogs of blocked domains from home
* Add API for listing and creating account domain blocks
* API for creating/deleting domain blocks, tests for Status#ancestors
and Status#descendants, filter domain blocks from them
* Filter domains in streaming API
* Update account_domain_block_spec.rb
* Add <ostatus:conversation /> tag to Atom input/output
Only uses ref attribute (not href) because href would be
the alternate link that's always included also.
Creates new conversation for every non-reply status. Carries
over conversation for every reply. Keeps remote URIs verbatim,
generates local URIs on the fly like the rest of them.
* Conversation muting - prevents notifications that reference a conversation
(including replies, favourites, reblogs) from being created. API endpoints
/api/v1/statuses/:id/mute and /api/v1/statuses/:id/unmute
Currently no way to tell when a status/conversation is muted, so the web UI
only has a "disable notifications" button, doesn't work as a toggle
* Display "Dismiss notifications" on all statuses in notifications column, not just own
* Add "muted" as a boolean attribute on statuses JSON
For now always false on contained reblogs, since it's only relevant for
statuses returned from the notifications endpoint, which are not nested
Remove "Disable notifications" from detailed status view, since it's
only relevant in the notifications column
* Up max class length
* Remove pending test for conversation mute
* Add tests, clean up
* Rename to "mute conversation" and "unmute conversation"
* Raise validation error when trying to mute/unmute status without conversation
* Fix#2027 - Accept own ID for remote follow with and without preceding @
Fix#2177 - Omit leading "acct:" in remote follow redirect template expansion
* Fix test
Fix#2196 - Respond with 201 when Salmon accepted, 400 when unverified
Fix#2629 - Correctly handle confirm_domain? for local accounts
Unify rules for extracting author acct from XML, prefer <email>, fall back
to <name> + <uri> (see also #2017, #2172)
* Replace browserify with webpack
* Add react-intl-translations-manager
* Do not minify in development, add offline-plugin for ServiceWorker background cache updates
* Adjust tests and dependencies
* Fix production deployments
* Fix tests
* More optimizations
* Improve travis cache for npm stuff
* Re-run travis
* Add back support for custom.scss as before
* Remove offline-plugin and babili
* Fix issue with Immutable.List().unshift(...values) not working as expected
* Make travis load schema instead of running all migrations in sequence
* Fix missing React import in WarningContainer. Optimize rendering performance by using ImmutablePureComponent instead of
React.PureComponent. ImmutablePureComponent uses Immutable.is() to compare props. Replace dynamic callback bindings in
<UI />
* Add react definitions to places that use JSX
* Add Procfile.dev for running rails, webpack and streaming API at the same time
* Add coverage for create with empty acct value
* Add coverage for create with webfinger failure
* Add coverage for create with webfinger providing bad values
* Add coverage for create when webfinger is good
* Add coverage for session[:remote_follow] having data
* Simplify how remote follow pulls acct from session
* Remote follow behaves more like model
* Move the discovery portions of remote follow out of controller
* Check for suspended accounts
* Naive approached to timeline filtering
* Convert allowed_languages into a db column
* Allow users to choose languages to see statuses in
* Style list items as two columns
* Add a hint to explain language filtering preference
* Add coverage for admin/confirmations controller
* Coverage for statuses controller show action
* Add coverage for admin/domain_blocks controller
* Add coverage for settings/profiles#update
* Add render_views in more places
* Delegate methods from account to user with allow nil true, so that admin accounts show view renders when missing a user
* Use actual account instances in authorize follow controller spec
This PR fixes I18n.locale for rake middlewares. Mastodon uses Devise that depends on Warden.
Warden::Manager can be found in rake middleware. It is outside of the controller.
In the case of authentication failed, warden calls throw(:warden). At the time Warden::Manager
delegates request to failure_app to generate response and flash[:alert] after catching it.
Unfortunately, I18n.locale is already reset then because I18n.with_locale is enabled only
inside the controller. If we used I18n.locale=, Devise::FailureApp could get the current locale.
* Change ActivityPub paging to match spec. Clean up ActivityPub outbox changes.
* Fix code style and test failures for OutboxController.
* Attempt to fix CI errors.
* Add failing spec for oauth/authorized_applications controller
* Use explicit reference to flashes partial from admin layout
Because some of the controllers which use the admin layout do not inherit from
application controller, this partial is not in their view path.
* Make private toots get PuSHed to subscription URLs that belong to domains where you have approved followers
* Authorized followers controller, stub for bulk action
* Soft block in the background
* Add simple test for new controller
* Rename Settings::FollowersController to Settings::FollowerDomainsController, paginate results,
rename "private" post setting to "followers-only", fix pagination style, improve post privacy
preferences style, improve warning style
* Extract compose form warnings into own container, show warning when posting to followers-only with unlocked account
* Clean up collapsible components
* Expose user Outboxes and AS2 representations of statuses
* Save work thus far.
* Fix bad merge.
* Save my work
* Clean up pagination.
* First test working.
* Add tests.
* Add Forbidden error template.
* Revert yarn.lock changes.
* Fix code style deviations and use localized instead of hardcoded English text.
* Add spec coverage for settings/two_factor_auth area
* extract setup method for qr code
* Move otp required check to before action
* Merge method only used once
* Remove duplicate view
* Consolidate creation of @codes for backup
* Move settings/2fq#recovery_codes to settings/recovery_codes#create
* Rename settings/two_factor_auth#disable to #destroy
* Add coverage for the otp required path on 2fa#show
* Clean up the recovery codes list styles
* Move settings/two_factor_auth to settings/two_factor_authentication
* Reorganize the settings two factor auth area
Updated to use a flow like:
- settings/two_factor_authentication goes to a #show view which has a button
either enable or disable 2fa on the account
- the disable button turns off the otp requirement for the user
- the enable button cycles the user secret and redirects to a confirmation page
- the confirmation page is a #new view which shows the QR code for user
- that page posts to #create which verifies the code, and creates the recovery
codes
- that create action shares a view with a recovery codes controller which can be
used separately to reset codes if needed
* Add render_views for admin/settings spec
* Add coverage for admin/settings#update
* Add coverage for admin/settings typecasting open_registrations setting
* Simplify how admin/settings finds the value for updating
* Rely on activerecord to not update a value that hasnt changed
* Add coverage for non-existent setting
* Use a constant for boolean settings
* Add routing specs for accounts followers and following actions
* Use more restful route naming for public account follow pages
Moves two actions:
- accounts#followers to accounts/follower_accounts#index
- accounts#following to accounts/following_accounts#index
Adds routing spec to ensure prior URLs are preserved.
* Add recovery code support for two-factor auth
When users enable two-factor auth, the app now generates ten
single-use recovery codes. Users are encouraged to print the codes
and store them in a safe place.
The two-factor prompt during login now accepts both OTP codes and
recovery codes.
The two-factor settings UI allows users to regenerated lost
recovery codes. Users who have set up two-factor auth prior to
this feature being added can use it to generate recovery codes
for the first time.
Fixes#563 and fixes#987
* Set OTP_SECRET in test enviroment
* add missing .html to view file names
* Simplify admin/reports controller filtering for index
* Rename parameter to resolved
* Fix issue where reports view could not access filter_link_to
* Add coverage for admin/reports controller
* DRY up resolution of related reports for target account
* Clean up admin/reports routes
* Add Report#statuses method
* DRY up current account action taken params
* Rubocop styles
* Add request spec for host meta route returning xml
* Add routing spec for xrd routes
* Update well-known routes
* Move webfinger and host-meta actions to their own controllers
* Remove unused account_params method in admin/accounts controller
* Introduce AccountFilter to find accounts
* Use AccountFilter in admin/accounts controller
* Use more restful routes admin silence and suspension area
* Add admin/silences and admin/suspensions controllers
The spec was checking the activity_id of the activities held in notifications
within the controller.
Because the activities are different models, it is possible that they are
created with the same database IDs, and when they are this spec fails because an
activity which should not count as a match is counted as one.
* Add basic coverage for settings/exports controller
* Remove unused @account variable from settings/exports controller
* Add coverage for download export actions
* Remove deprecated `render :text` in favor of `send_data` for csv downloads
* Add model to handle exports
* Use Export class in settings/exports controller
* Simplify settings/exports controller methods
* Move settings/export to more restful routes
* Add Admin::BaseController to wrap admin area
Extracts the setting of the `admin` layout and verifying that users are admins
to a common base class for the admin/ controllers.
* Add basic coverage for admin/reports and admin/settings controllers
* Allow users to update their Account in the API
It would be nice for API clients to be able to allow users to update
their accounts without having to wrap Mastodon in a web view. This patch
adds an API endpoint to let users submit a PATCH for their account.
Signed-off-by: David Celis <me@davidcel.is>
* Add /api/v1/accounts/update_credentials to the API docs
Signed-off-by: David Celis <me@davidcel.is>
application website validation, don't link to app website if website isn't set,
also comment out animated boost icon from #464 until it's consistent with non-animated version
Filters out hidden stream entries from Atom feed
Blocks now generate hidden stream entries, can be used to federate blocks
Private statuses cannot be reblogged (generates generic 422 error for now)
POST /api/v1/statuses now takes visibility=(public|unlisted|private) param instead of unlisted boolean
Statuses JSON now contains visibility=(public|unlisted|private) field
resources that require a user context vs those that don't (such as public timeline)
/api/v1/statuses/public -> /api/v1/timelines/public
/api/v1/statuses/home -> /api/v1/timelines/home
/api/v1/statuses/mentions -> /api/v1/timelines/mentions
/api/v1/statuses/tag/:tag -> /api/v1/timelines/tag/:tag
Fetching atom extracted from FetchRemoteAccountService and FetchRemoteStatusService
into FetchAtomService. Mentions of the constant "http://activityschema.org/collection/public"
skipped as it's not a real URL/user.
This is a big one, so let me enumerate:
Accounts as well as stream entry pages now contain Link headers that
reference the Atom feed and Webfinger URL for the former and Atom entry
for the latter. So you only need to HEAD those resources to get that
information, no need to download and parse HTML <link>s.
ProcessFeedService will now queue ThreadResolveWorker for each remote
status that it cannot find otherwise. Furthermore, entries are now
processed in reverse order (from bottom to top) in case a newer entry
references a chronologically previous one.
ThreadResolveWorker uses FetchRemoteStatusService to obtain a status
and attach the child status it was queued for to it.
FetchRemoteStatusService looks up the URL, first with a HEAD, tests
if it's an Atom feed, in which case it processes it directly. Next
for Link headers to the Atom feed, in which case that is fetched
and processed. Lastly if it's HTML, it is checked for <link>s to the Atom
feed, and if such is found, that is fetched and processed. The account for
the status is derived from author/name attribute in the XML and the hostname
in the URL (domain). FollowRemoteAccountService and ProcessFeedService
are used.
This means that potentially threads are resolved recursively until a dead-end
is encountered, however it is performed asynchronously over background jobs,
so it should be ok.